What regulations should be followed when refueling oil tankers?

The refueling process of oil tankers not only requires a high degree of installation accuracy but also strictly follows a specific set of operation procedures. When installing the fuel tank, the first task is to carefully check the installation accuracy of the oil tanker. Then, examine whether the surface of the fuel tank remains flat. After that, carefully verify the tightness of the fuel tank welds. Only then can the refueling operation be carried out.

What potential risks exist when an oil tanker is fully filled with fuel?

After being filled with fuel, oil tankers are confronted with a series of potential risks. Firstly, high temperatures are generated during the oil loading process. If the oil is not filled properly, it may cause the temperature of the oil tanker to rise sharply, posing a risk of explosion. Secondly, after filling up the tank, oil leakage accidents are prone to occur, which not only endangers the safety of the vehicle itself but also may cause serious pollution to the environment. Therefore, extra caution must be exercised during the operation process.

Key points and safety measures for refueling oil tankers

When refueling oil tankers, a series of safety guidelines must be followed. The primary task is to carefully inspect the installation accuracy of the oil tanker, including the flatness of the tank surface and the tightness of the tank welds, to ensure that no accidents occur during the refueling process. At the same time, closely monitor the temperature changes of the oil tanker. Once the temperature is found to exceed the normal range, stop refueling immediately to prevent possible explosion hazards. In addition, throughout the entire filling process, effective measures must be taken to prevent oil leakage, thereby ensuring environmental safety.